How to Clean a Patio Without Damaging It
To learn how to clean a patio safely, match the method to the material: sweep first, then jet wash porcelain at normal pressure, natural stone at low pressure with a wide fan, and block paving at medium pressure held at an angle, re-sanding the joints with kiln-dried sand afterwards. Spring is a good time.
Last reviewed: by Natural Aspect Gardening
Published: by Natural Aspect Gardening, Epsom
How to Clean a Patio Safely at a glance
- First step
- Sweep away leaves, soil and loose debris
- Porcelain
- Normal pressure; very hard-wearing
- Sandstone and natural stone
- Low pressure, wide fan nozzle
- Block paving
- Medium pressure at about 30 degrees, then re-sand joints
- Best time
- Spring or late summer; avoid frost
What is the safest way to clean each type of patio?
| Surface | Method | Watch out for |
|---|---|---|
| Porcelain | Brush, then jet wash at normal pressure | Very little; it is non-porous |
| Sandstone and natural stone | Low pressure, wide fan, keep the nozzle moving | High pressure can etch the surface |
| Block paving | Medium pressure at about 30 degrees, sprayed diagonally | Jointing sand washing out |
| Concrete slabs | Normal pressure | Stubborn stains may need repeat passes |
How do you jet wash block paving without loosening it?
Block paving is where knowing how to clean a patio properly matters most. Paving manufacturer Marshalls recommends holding the pressure washer at about 30 degrees and spraying diagonally at a medium pressure. Too much pressure can mark the blocks and break up the jointing sand. Once dry, brush kiln-dried sand into the joints and sweep away the excess, so the blocks stay locked together.
What are the steps to clean a patio?
- Clear and sweep the patio, removing pots, furniture and loose debris.
- Wet the surface and test the pressure on a hidden corner.
- Wash methodically in overlapping strips, working away from the house and towards drainage.
- Rinse dirty water and debris off the surface, and keep any cleaning products out of road drains, which usually run straight to streams and rivers.
- Re-sand or re-point joints where needed once the patio is dry.
When is the best time to clean a patio?
Timing is part of knowing how to clean a patio. Spring is the most popular time, ready for summer, and late summer works well before autumn leaves fall. Avoid frosty weather, because water left in joints and porous stone can freeze. Shady patios under trees grow moss and algae faster, so they may need cleaning more than once a year.
Sources and further reading
Related guides and services
- Planning Permission for a PatioBack-garden patios, the 5 square metre front-garden rule and permeable paving.
- Artificial Grass vs Real TurfUpkeep, wildlife, drainage and laying times compared side by side.
- Jet WashingOur jet washing service in Epsom and nearby villages.
- All garden guidesBrowse every guide in one place.
How to Clean a Patio Safely FAQs
Can I jet wash my sandstone patio?
Yes, but use a low pressure, a wide fan nozzle and keep the lance moving. Sandstone is softer than porcelain and high pressure can mark the surface.
Does jet washing damage block paving?
It can wash out the jointing sand if the pressure is too high. Use a medium pressure at an angle and re-sand the joints with kiln-dried sand once dry.
How often should a patio be cleaned?
Most patios need a clean once a year. Shady patios that grow moss and algae quickly may need cleaning twice a year.
What is the best time of year to clean a patio?
Spring or late summer. Avoid frosty weather, when water left in joints and porous stone can freeze.
Can you jet wash my patio in Epsom?
Yes. Natural Aspect Gardening provides jet washing for patios, driveways and paths across Epsom, Ewell and nearby villages. Call 07903085777 for a quotation.
Would you like a hand with this?
Our jet washing service covers Epsom, Ewell and nearby villages. Call 07903085777 for a quotation.
